EFSM - Metric sizes, with 4 Mounting Holes - igus

??

CAD model selection

	1
	2
	3
	4
	5
	6
	7
	8
	9
	10
	11
	12

		LINA Bill of material	ARTNR Part no. ⁿ/ₐ	ZAK Max. axial permissible tensile strength short term [N]	ZAL Max. axial permissible tensile strength long term [N]	ZRK Max. radial permissible tensile strength short term [N]	ZRL Max. axial permissible tensile strength long term [N]	AM Max. Torque [Nm]	SW1 Max. pivot angle [°]	D1 Diameter [mm]	DB Diameter [mm]	L Width [mm]	J Center bore [mm]	A1 Height of Plate [mm]	AG Height Total [mm]	N Bore d [mm]

		EFSM-04	EFSM-04	200	100	1000	500	0.6	28	4	14.0	25	17	4.5	8.5	3.2
		EFSM-05	EFSM-05	300	150	1000	500	0.6	29	5	14.0	25	17	4.5	8.5	3.2
		EFSM-06	EFSM-06	300	150	1000	500	0.6	25	6	14.0	25	17	4.5	8.5	3.2
		EFSM-08	EFSM-08	450	225	1400	700	1.3	25	8	18.0	33	22	5.5	10.5	4.3
		EFSM-10	EFSM-10	700	350	2000	1000	2.5	25	10	21.9	38	26	6.5	12.0	5.3
		EFSM-12	EFSM-12	850	425	2500	1250	2.5	21	12	25.0	40	28	7.0	13.0	5.3
		EFSM-15	EFSM-15	1100	550	3000	1500	4.5	20	15	30.0	49	34	8.5	15.5	6.4
		EFSM-16	EFSM-16	1350	675	3200	1600	4.5	27	16	32.0	52	36	9.0	16.5	6.4
		EFSM-17	EFSM-17	1600	800	3400	1700	4.5	21	17	35.0	54	38	10.0	18.0	6.4
		EFSM-20	EFSM-20	2000	1000	4000	2000	10.5	19	20	40.0	65	45	11.0	20.0	8.4
		EFSM-25	EFSM-25	2400	1200	5600	2800	10.5	15	25	48.5	74	52	14.0	25.0	8.4
		EFSM-30	EFSM-30	2800	1400	6000	3000	21.5	14	30	54.5	85	60	15.0	26.0	10.5

Additional Information

Recommendations

Similar parts

Related Equipment

Additional Data

Users who viewed this, were also interested in

EFOM - Metric sizes, with 2 Mounting Holes

EFOM - Metric sizes, with 2 Mounting Holesigus 19.01.2021

EBRM - Metric sizes, right-hand thread

EBRM - Metric sizes, right-hand threadigus 19.01.2021

EBLM - Metric sizes, left-hand thread

EBLM - Metric sizes, left-hand threadigus 19.01.2021

FJUM-02 - Square Flange, mm

FJUM-02 - Square Flange, mmigus 12.09.2022

KBRM - Metric sizes, right-hand thread

KBRM - Metric sizes, right-hand threadigus 19.01.2021

KSFM GT - Metric sizes, with 4 Mounting Holes, Split design

KSFM GT - Metric sizes, with 4 Mounting Holes, Split designigus 19.01.2021

GERMKE - Metric sizes, right-hand thread, with clevis pin and circlips, used in combination with series E rod end bearings

GERMKE - Metric sizes, right-hand thread, with clevis pin and circlips, use...igus 19.01.2021

OGA - Pillow Block, open, Long Design, mm

OGA - Pillow Block, open, Long Design, mmigus 12.09.2022

DryLin® SHTC - Flexible

DryLin® SHTC - Flexibleigus 12.09.2022

KBLI - Inch sizes, left-hand thread

KBLI - Inch sizes, left-hand threadigus 19.01.2021

RJUI-03 - Liner Plain Bearing, inch

RJUI-03 - Liner Plain Bearing, inchigus 19.01.2021

DryLin® SET - EasyTube

DryLin® SET - EasyTubeigus 12.09.2022

GERMK - Metric sizes, right-hand thread, with clevis pin and circlip

GERMK - Metric sizes, right-hand thread, with clevis pin and circlipigus 19.01.2021

JUMO-01 - Liner, for supported shafts, mm

JUMO-01 - Liner, for supported shafts, mmigus 20.07.2021